The HONOR X series Returns with Three New Entries

HONOR is expanding its offerings once again. The company has been coming out with all the punches this year. This time, after flexing its flagship prowess with the HONOR 50 and the HONOR Magic V, HONOR is looking to the more affordable offerings they were once renown for. They are introducing three new entries into their X series with a little bit of a rename.

HONOR X9 & X9 5G Leads the new X Trio

The new HONOR X series is spearheaded by the Snapdragon 695 touting HONOR X9 5G. It comes with 8GB of RAM and 128GB of internal storage. When it comes to the display it comes with a 6.81-inch FullView Display with a 120Hz refresh rate and an FHD+ resolution. The X9 5G comes with a triple camera setup with a 48-megapixel main sensor complemented by a 2-megapixel macro and 2-megapixel depth sensor. Upfront, there is a 16-megapixel sensor for selfies.

In the case of the HONOR X9, it’s important to mention the 5G moniker as the HONOR X9 also comes without 5G connectivity. The regular X9 comes with the Snapdragon 680 instead. That said, it comes with a more robust quad camera setup. The main sensor is a 64-megapixel main sensor complemented by an 8-megapixel wide sensor, 2-megapixel sensing macro sensor and 2-megapixel sensing depth sensor. The display on the X9 also has a lower refresh rate of 90Hz. Other than these, the HONOR X9 and X9 5G share the same design and specs including a 4,800mAh battery with 66W fast charging with HONOR SuperCharge and USB Type C.

The design of the HONOR X9 series hearkens back to the HUAWEI P40 with the circular accent emblazoned at the back. It also contains the multiple camera sensors and flash that the smartphone comes with. The face of the phone is covered with the HONOR FullView Display with a punch hole for the selfie camera.

HONOR X8 – Putting the Middle in Mid-range

The HONOR X series will also contain the HONOR X8 which touts the same Snapdragon 680 that powers the X9. In all ways, it’s the hybrid of the X9 and X9 5G. It comes with a slightly smaller 6.7-inch FullView display with a 90Hz refresh rate and FHD+ resolution. Aside from this, it also comes with a smaller 4,000mAh battery with support for 22.5W HONOR SuperCharge via USB-C connection.

All of these specs aside, the HONOR X8 comes with the nearly same camera setup as the HONOR X9. However, it comes with a smaller 5-megapixel wide sensor. That said, it also has a different design language which is more angular than the fluid X9. It also departs from the circular accent in favour of a square module containing all its sensors.

HONOR X7 – Bringing even more affordability

Rounding up the HONOR X series is the HONOR X7. The HONOR X7 comes with the same Snapdragon 680 as its siblings with the same amount of internal storage but a lower 4GB of RAM. It comes with a larger 6.74-inch HONOR FullView Display with an HD+ resolution and 90Hz refresh rate. On the camera front, it comes with the same setup as the X8 albeit having a smaller 8-megapixel selfie camera. It comes with a larger 5,000mAh battery with support for 22.5W HONOR SuperCharge via USB-C.

The HONOR X7 comes with the familiar design we’ve seen in the HONOR 50 before. However, it comes with a waterdrop display design where the selfie camera is. It’s also not curved like the HONOR 50.

Pricing and Availability

HONOR’s X series will be available starting on 7th April 2022. All members of the HONOR X Series will be launching with EMUI 4 powered by Android 11.

The HONOR X9, X9 5G and X8 will be available in Titanium Silver, Ocean Blue and Midnight Black. It will be available for MYR1,299, MYR1,099 and MYR899 respectively.

The HONOR X7 will be available for MYR699 in Titanium Silver and Ocean Blue.

HOME+ Supports Hong Kong Jockey Club Food Assistance Programme – E-Food Bank Service


Online Grocery Shopping & Home Delivery

HONG KONG, March 29, 2022 /PRNewswire/ — The fifth wave of the pandemic has brought tremendous challenges to families and individuals of the transitional poor. To respond in times of uncertainty, e-shopping platform HOMEPLUS (“HOME+”) is pleased to be a CSR Partner of the “Jockey Club Food Assistance Programme” initiated and funded by The Hong Kong Jockey Club Charities Trust, coordinated by St. James’ Settlement and five other major non-profit organisations. Under its E-Food Bank Service, HOME+ will provide eligible individuals and families with an e-platform so that they can stay home safely and order nutritious food online. A credit equivalent to HK$400 will be provided to the account of each eligible individual each week, which can be spent on the e-platform. In order to minimise the risk of viral transmission, items ordered via HOME+ will be delivered to the doorstep.

June Lam, CEO of HOME+ said, “We are honoured to participate in this project and provide eligible individuals and families with food supplies via our convenient e-shopping services amid COVID. We have been exploring strategic collaborations with various NGO partners to leverage the HOME+ platform and deliver a wide range of food to people in need while they stay safe at home during the pandemic and not have to panic over the supply of food and daily necessities.”

About HOME+

HOMEPLUS (“HOME+”) + is an online shopping platform supported by industry leaders – Hong Kong Broadband Network, Dah Chong Hong and Kerry Logistics. With “Always Deliver More” as the brand concept, HOME+ brings “more” special offers, “more” bespoke service, “more” specialized service and “more” flexible cooperation model to create a win-win shopping experience for customers and merchants by providing a wide range of quality products covering wholesome foods, in-the-trend appliances, health supplements, personal care goods, and many more. Shop now at: home-plus.hk

Intel’s Core i9-12900KS is The World’s Fastest CPU at 5.5 GHz 

Intel, on a recent note, has been making quite a comeback. Their competitor, AMD really wiped the floor when they introduced the 5000 series Ryzen processors that made Intel’s 10th and 11th Generation processors look like old processors. When Intel introduced their 12th generation Core processors, people paid attention again, we paid attention.  

The 12th generation Core processors codenamed Alder Lake has already shown some of its power since the series’ launch. The higher-end processors have proven that Intel has not forgotten how to make powerful processors for gamers and content creators alike. They are also unique in the space of PC processors with a Big Small architecture that we are more used to seeing on smartphone chips. The 12th Generation Core i9, for example, packs eight performance and eight efficiency cores. They are also known to be very power-hungry chips, so if you are considering an Intel Alder Lake build, you do want to really think about beefing up your PSU (Power Supply Unit). 

Just having the lead on performance never seems enough though. Intel wants to keep the lead and destroy its competition. On a side note, it is good to see the two protagonists in the CPU industry outdoing each other every step of the way. We are the winners here. We are also looking forward to AMD announcing their Ryzen 7000 series CPUs in this case,  

Back to the topic, Intel wants to also wipe the floor with 12th generation Core CPUs, just before AMD makes their move with the 7000 series. They released their most powerful CPU yet, the Core i9-12900KS. While the naming scheme is a little confusing, it is a new Core i9 that we are seeing here. 

To be fair, when we say new, it is not an entirely new CPU. It is still an Alder Lake architecture. Structurally, it is the same as any Inte Core i9-12900 series chips. What differs though is how much power it commands.  

intel core i9 12900ks 2 16x9 1
Source: Intel

The eight performance cores can now be clocked to up to 5.5 GHz with turbo boost. The previeous Intel Core i9-12900K could only boost up to 5.2 GHz at best. You could overclock it, obviously, since it is an unlocked processor. Why would you attempt to overclock an Intel Core i9-12900K when you can get the already overclocked stock Core i9-12900KS. The newly announced processor is also unlocked, by the way. 

There is a small catch though. While the Core i9-12900K draws a minimum of 125W, the new 12900KS needs at least 150W from your PSU. Turbo boost will draw up to 241W for both processors, no increases there, which is sort of good news for your PSU. Other than a slight increase in the clock speeds for the efficiency cores, everything else remains the same as the older 12900K.  

As with the current 12th generation chips, you want to work with the Z690 chipset motherboards to get the most out of it. It also supposed DDR5 4800 MT/s RAM and PCIe gen 5.0 technology. Of course, the older DDR4 and PCIe Gen 4.0 (no, this is not that old) technologies are still supported. 

You might be wondering; “who needs all this power?” We will say that no one really needs all this power unless they are working in the creative industry and needs some extra horsepower to render videos and 3D animations. Then again, there are specifically built workhorses for that. This is made for “gamers and overclocking enthusiasts”, according to Intel. We will go with that, but these are people with money and time.  

It will be available April 5th onward in select regions. We do not know if that includes Malaysia or not. As it is, supply situations in Malaysia are still quite dire. It will also set you back at least US$ 739 (MYR 3,120*). We say at least because that also depends on stock availability and demand. For more information on the Intel Core i9-12900KS, you can head over to their website.  

*Approximately based on exchange rate of US$ 1 = MYR 4.22 on xe.com as of 29/03/2022 

ASC Technologies and ADDCOM enter Alliance


Recording & analytics for the public and financial sector in Australia and New Zealand

HÖSBACH, Germany, March 29, 2022 /PRNewswire/ — ASC Technologies and ADDCOM announce their partnership to provide innovative recording, quality management and analytics products and cloud services to customers in Australia and New Zealand markets. The partnership addresses the on-premise government sector as well as the fast-growing market of cloud compliance recording for Microsoft Teams.

ASC is one of the worldwide leading providers of software and cloud solutions for omni-channel recording, quality management and analytics. ADDCOM Contact Solutions is an expert integration partner for delivering quality recording, analytics, and cloud conferencing solutions, trusted by Australian and New Zealand customers.

Capturing and storing all communications data in a compliant and reliable manner is the fundamental requirement of all recording customers; however, both ASC and ADDCOM believe that the true value-add is in turning this data into business insights. Therefore, ASC focusses on providing leading analytics technologies, and ADDCOM puts strong emphasis on applying these technologies to unlock the value of every interaction.

For customer intimacy, ASC has always relied on strong local partners around the globe. ADDCOM brings a customer centric approach, starting with Australian and New Zealand customers’ business requirements and turning those into customer solutions.

Based on this strong alignment in terms of technology strategy and customer approach, ASC Technologies and ADDCOM forge this partnership. ADDCOM will become ASC’s preferred partner for delivering on-premise recording, quality management and analytics solutions to Australian and New Zealand customers, with a focus on government and financial services organisations. In addition, ADDCOM will leverage ASC’s Recording Insights native cloud service to support customers in their migration to Microsoft Teams.

“I am excited about this partnership. ADDCOM brings a wealth of experience and a strong customer base in Australia and New Zealand to this partnership. In combination with our leading technology, from on-premise PBX recording to cloud services for Microsoft Teams, we have a strong joint proposition for the Australian and New Zealand market”, Gerald Kromer, CEO of ASC Technologies.

“We’re excited to introduce ASC’s leading recording, transcription, translation, and analytics platform to our solution portfolio. ASC has a very strong solution for clients with a Teams environment. Some of Australia’s largest businesses and government organisations that ADDCOM serves in a critical capacity will benefit from this alliance. We look forward to working with ASC Technologies and enhancing their footprint in the region”, Craig Alvarez, CEO ADDCOM.

About ADDCOM

About ASC

d’Alba Premium Vegan Brand, White truffle first spray serum has exceeded 90,000 reviews

SEOUL, South Korea, March 28, 2022 /PRNewswire/ — The white truffle first spray serum, the main product of premium vegan brand d’Alba, surpassed 10 million global cumulative sales in January this year. Despite the difficult market due to COVID-19 last year, the solid brand power in the domestic market allowed continuous increase in sales in the global market through e-commerce channels such as Amazon (USA), Qoo10 (Japan), Wildberries (Russia), and Shopee (Indonesia) etc.

d’Alba Premium Vegan Brand, White truffle first spray serum have exceeded 90,000 reviews
d’Alba Premium Vegan Brand, White truffle first spray serum have exceeded 90,000 reviews

The main product of d’Alba, the white truffle first spray serum, provides nutrients and hydration with a known superfood, avocado oil, and one of the rare and excellent antioxidants, white truffle infused essence, forming a double-layered structure. This all-in-one product can give both effects of a serum and a mist by simply shaking, so the oil and essence layers mix thoroughly, and spraying after cleansing. 

With its excellent ingredients, quality, and ease in use, d’Alba’s white truffle spray serum has recently achieved more than 90,000 reviews in “Naver SHOPPING”, Korea’s largest e-commerce channel. The record of 90,000 reviews for a single product is hardly found in other brands and other skincare categories, indicating that d’Alba has become a reliable brand for many consumers for a long time.

d’Alba is receiving good reviews not only from beauty creators but also from general consumers. During the year of 2021, a total of 1,262 beauty YouTubers in Korea voluntarily published a total of 24,510 unsponsored content with 4,221 brands. Among them, d’Alba ranked first in the skincare category, verifying that it is a brand loved by beauty creators. The d’Alba white truffle vital spray serum ranked first in the category after a fierce competition of 1,434 to 1.

The reason for the belief in d’Alba products from general consumers and beauty creators can be found in its excellent quality. Rare raw materials, especially the high quality Italian white truffles, are infused in all products, and all of them have completed hypoallergenic tests. Recently, it has been continuing its vegan campaign by obtaining the Italian vegan V-label certification, known for its pickiness, and releasing a ‘Suite Healing with d’Alba package’ through collaboration with Grand Hyatt Hotel, Seoul. Through this, d’Alba is ranked No. 1 in preference among vegan brands conducted by the Korea Corporate Reputation Research Institute and is strengthening its branding as a premium vegan brand.

The d’Alba white truffle first spray serum is growing rapidly not only in Korea but also in United States. It has also been acknowledged in the U.S. market by receiving 455 ratings and 4.5/5.0 rating over the past year in Amazon. The d’Alba white truffle first spray serum entered TOP 100 of the Amazon ‘FACE MIST’ Category in December 2021. After an event was held in March to commemorate the 7th anniversary of d’Alba’s foundation, it ranked fifth in the ‘FACE MIST’ category.

Cision View original content to download multimedia:https://www.prnewswire.com/news-releases/dalba-premium-vegan-brand-white-truffle-first-spray-serum-has-exceeded-90-000-reviews-301508798.html

[Video] The Predator Triton 500 SE In-Depth Review – The Thin Beast Thing

Acer’s Predator gaming laptop line-up in 2020 was one that was filled with products that sort of look like each other. One gaming laptop stood out though. That one gaming laptop that stood out above the rest is the Predator Triton 500 gaming laptop. It was thin, thinner than any Predator gaming laptop you can find. It is not unreasonably thin that temperature becomes a concern too. At the same time it looks completely ordinary.

We love the form factor the Predator Triton 500 presented. But is a product with 10th Generation Intel Core processor and NVIDIA’s GeForce RTX 20 series GPU. There is a new one, and it packs Intel’s and NVIDIA’s latest. Not just the latest though, the most powerful in the mobile line-up; the Core i9 and the GeForce RTX 3080.

It also comes with a new age design that is even more minimalist than before. It gained a little bit of heft and weight too. But essentially, the philosophy of the product is the same. Make it thin, as thin as possible. But make it powerful also, immensely powerful.

That means that the price is also bumped up to MYR 12,999. Does it still live up to the Triton 500 name? Is the Triton 500 SE even worth that kind of money? We find out.

Get your Predator Triton 500 SE here: https://acer.co/36NWtkm!
More information on the Predator Triton 500 SE here: https://www.acer.com/ac/en/MY/content/predator-series/predatortriton500se!

Send Even Bigger Files with Future WhatsApp!

WhtasApp’s beta is now available for iOS 15! While that is news, it is not the one we are excited about. Sure, it is important that WhatsApp explore and test their app on every available platform as soon as they are available. But new WhatsApp beta builds always come with new features we are likely to see in the coming updates for regular WhatsApp users.  

The update is iOS beta version 22.7.0.76. The update introduced to be compatible with iOS 15 brings about quite a significant step forward in the functionality that is file sharing on WhatsApp. It bumped up the 100MB limit that used to be the staple for WhatsApp. It is important, especially when you need to be sharing large format media files like videos to your colleagues, or friends, or clients without the clutter and slowness of emails, or simply uploading to a cloud storage only to share a link after. They did not bump up the 100MB limit to 150MB, not just 1GB too. They have bumped up the file sending capacity to 2GB.  

WA NEW MEDIA FILE SHARING LIMIT IOS
Source: WhatsApp Beta Info

While WhatsApp tends to compress your images and videos, you currently can send uncompressed image files within WhatsApp. It is a small turnaround, but it is possible. But the current release of WhatsApp will still limit your file sharing size to 100MB. You can send most photos, AAC and FLAC audio files. You will not be able to share high resolution videos, or WAV files in most cases, important in certain professional environments.  

2GB is basically a 2000% jump from the current limit. For us at least, 2GB could allow us to get our finished videos out to our clients via WhatsApp immediately instead of slow emails. It improves our workflow alongside the clients.  

The test is currently only available to iOS and certain Android users in Argentina. It is just a test though, so we can only take it with a pinch of salt. Only time will tell if we are going to be able to share larger format files via WhatsApp for now. We are hopeful though, since WhatsApp is one of the main communication platforms we heavily rely on in Malaysia.  

Source: WhatsApp Beta Info

Qeeka Home Reports Solid Growth of 20.8% YoY in 2021

The firm’s SaaS platform is driving an industry-wide digital transformation

SHANGHAI, March 28, 2022 /PRNewswire/ — On March 22, Qeeka Home (01739.HK, operator of Jia.com in China) (the “Company”), a SaaS enabled solution platform serving China’s interior design and construction (IDC) sectors, released its 2021 full-year financial results. For the past financial year, the Company reported revenue of RMB 1,107 million, a year-on-year increase of 20.8%, with net profit attributable to shareholders reaching RMB 74 million, surging 82.3% compared to the prior year.

The strong growth was a result of the success of Qeeka Home’s total SaaS-enabled strategy, a driver to an industry-wide digital transformation that has delivered higher overall efficiency and allowed the Company to redeploy the best of its resources to address the pain points and challenges facing the supply and demand sides in terms of the sales and delivery process, helping the Company realize robust growth.

Revenue increased 20.8% year-on-year, with huge potential in the market for housing stock

As an industry heavily dependent on physical operations, the home improvement sector has been hit hard by the recurring epidemic, especially in in-person scenarios such as home visits to take measurements as well as delivery and installation of the completed product. As China further tightens regulation and supervision of the real estate market, both the supply of new homes and the resale of existing homes have witnessed a significant downturn, affecting to various degrees the steady growth of the home improvement industry. To make matters worse, soaring prices of raw materials have led to a dramatic cost increase for stakeholders and an ever more competitive market. Taken together, many industrial players experienced growth stagnation and are facing the dilemma where profit margins decline despite an increase in revenue. The industry now stands at an inflection point where a transition to the market for existing housing stock is a must-do.

According to data from China Index Academy, the country’s property sales increased 1.9% year on year to 1.79 billion square meters in 2021, while investments in real estate development and new construction both witnessed a dramatic decline compared to the prior year. Yet when China’s substantial economic development and the increase in disposable income among consumers are taken into consideration, a step up in what shoppers expect from their home improvement initiative shows that demand for quality product is clearly on the rise. In response to the shrinking new housing market, renovating existing accommodations or upgrading newly purchased second-hand homes has proven to be an effective means of improving the quality of home life. Based on the calculation of planning the renovation of a home every 10 to 15 years, owners who purchased a home between 2007 and 2020 will be looking to improve at some point over the next 10 years. That 13-year period was a golden age for the country’s property market, pointing the way to a soon-to-begin similar golden age for the home improvement and renovation segment.

Despite the huge potential in the market for existing housing, there’s a very big difference between refurbishment of an older residence, partial improvement, and renovation of a more recently built home. Refurbishment of older buildings presents tougher challenges as such customers are more dispersed, their needs are more diversified while both the customer acquisition and necessary construction work are more challenging. In other words, to establish a presence in the market, installers need to shift from a “rough” business model to one that is much more refined, where customer expectations are met in all respects through upgrading of product quality, improvement in supply chain efficiency, optimization of organization management, strengthening of digital capabilities, and addition of quality-focused services.

As a leading platform in the industry, with superior data and technology capabilities, Qeeka Home has been committed to offering SaaS solutions and extended services to home improvement firms, helping them improve their abilities to manage their businesses, reduce operating costs and reap higher efficiency. The platform facilitated the standardization of the industry by developing relevant benchmarks and giving premium merchants the tools what they need to bring in more customers by upgrading its Qijia Bao consumer protection plan and launching a merchant star rating system. The data shows that the number of active paying merchants on the Jia.com platform rose by 18.3% year on year to 5,799 in 2021, including 2,242 newcomers. The merchant retention rate climbed to 73%, while the retention rate of new paying merchants reached 81%, representing strong growth across-the-board.

Despite the downward pressure faced by the industry, the Qeeka Home platform has served to empower home improvement firms as they cope with the uncertainty and the necessary upgrade process. The platform also acts as a stabilizer for the industry’s small and medium-sized merchants who need a powerful partner to get them through the rough patch. For the full year of 2021, Qeeka Home booked total revenue of RMB 1,107 million, a year-on-year surge of 20.8%, with gross profit amounting to RMB 590 million, up 14.0%. Net profit attributable to shareholders reached RMB 74 million, a significant increase of 82.3%, representing a solid growth.

SaaS strategy drives the transition to digitalization for installers

Due to inherent weaknesses, coupled with fierce competition, the industry saw a sharp rise in the number of firms that called it quits. Installers need to reduce costs and improve efficiency and the only way to get there is through digitalization. According to research data, the digitalization rate of the IDC industry right now stands a paltry 10%, with massive headroom for growth. As a long-established platform, Qeeka Home is poised to be the first choice among installers once they opt for a digital upgrade.

Qeeka Home’s offering covers two major business segments: the SaaS-based home improvement empowerment platform and a range of interior design and decoration brands. Revenue from SaaS and extended services totaled RMB 630 million for the year, up 17.3%. The growth of core businesses was, for the most part, driven by the steady advancement of its digitalization-focused SaaS-enabled strategy, including providing a one-stop solution that covers the gamut from marketing services to supply chain procurement assistance to innovative value-added services. The solution will help them cope with real-world problems and improve operational efficiency.

When it comes to digital marketing, Qeeka Home generates leads through its own brands, reputation and general recognition across the market, and helps installers convert prospects through big data matching and upgrading consumer protection products to enhance customer acquisition. In terms of supply chain empowerment, Qeeka Home has adopted a hybrid of centralized purchasing and new retailing, allowing firms to reduce back-end procurement costs and improve efficiency through digital processes.

As the bulk of potential customers shifts to Gen Z, online brand visibility and consumer reviews are going to become the determining factors when a purchase is made. To optimize the user experience, Qeeka Home has put much effort into making sure the platform delivers the most optimized shopper experience during the home improvement purchasing process. Ongoing positive reviews from shoppers led the platform to record a year-on-year increase of 8.3% in the customer demand rate in 2021, while the average marketing revenue per lead stood at RMB 707, up 7.6% year-on-year.

According to a report by the Lead-Leo Research Institute, second-hand housing and existing housing stock are expected to be the main drivers of the growing demand for home improvement in the future. This is a sign that acquiring and serving the customer have become much more difficult for installers, combined with a new set of expectations from consumers that have just entered the market. Digitalization is an inevitable must-do for industry growth, as online platforms will appeal more to future buyers than traditional home improvement firms. With the benefits that can be generated from digitalization literally staring the industry in the face, Qeeka Home has made it a top priority to meet the expectations of Gen Z shoppers, offer installers more empowerment initiatives based on the SaaS platform, further strengthen R&D and optimize the in-house organizational structure. All of these steps will go a long way in helping home improvement shoppers avoid making costly mistakes, while acting to fully protect the rights and interests of consumers as well as optimize the customer experience end-to-end, with the end goal being the realization of the Company’s vision of the satisfied customer who lives in a beautiful and comfortable home.

About Qeeka Home 

Qeeka Home (01739.HK, domestic operator of Jia.com) is one of the largest SaaS enabled solution platforms in Interior Design & Construction (IDC) Industry in China. The company provides marketing service, supply chain service and other innovative value-added services to thousands of IDC service providers through the SaaS platform. Qeeka also operates several well-known IDC brands in China and provides consumers with capital protection and independent inspection services. Qeeka Home was founded in 2007 and listed on the main board of HKSE on 2018.

For more information, please contact:

Qeeka Home
Phone: (+86) 021-61740163 
E-mail: ir@qeeka.com

Cision View original content:https://www.prnewswire.com/news-releases/qeeka-home-reports-solid-growth-of-20-8-yoy-in-2021–301511399.html

Anycubic Unveils Kobra Series and Anycubic Photon M3 Series of 3D Printers

SHENZHEN, China, March 27, 2022 /PRNewswire/ — Anycubic, a leading 3D printer manufacturer, today announced its Anycubic Kobra series and Anycubic Photon M3 series of 3D printers, featuring leading-edge Anycubic LeviQ auto bed leveling technology and Anycubic LighTurbo matrix light source that provides a radically improved user-friendly experience and superb print details.


“Anycubic’s brand-new Kobra series will debut two variations — Kobra and Kobra Max. With integrated structure and modular design, the Kobra series of 3D printers allow users to easily assemble the machine without requiring any soldering or complex mechanical assembly,” said James Ouyang, Vice President of Anycubic. “To further simplify the leveling process, we upgraded the automatic calibration system to Anycubic LeviQ auto bed leveling with 25 points. It will eliminate the need to calibrate the printer manually, making it easier to level your printer and yield more consistent results.”

 Anycubic Kobra 3D printer makes printing easy
The Kobra 3D printer comes with an integrated direct extruder, which allows the machine to quickly push filament into the nozzle, providing reliable extrusion and easy retraction. In addition, the textured flexible spring steel sheet design can make 3D printed models more resistant and easier to remove.

Anycubic Kobra Max opens up the possibility of creating larger prints
The Kobra Max 3D printer features a build volume of 17.7 x 15.7 x 15.7 in. / 45 x 40 x 40 cm (HWD), which enables large-scale objects to be printed and the fun of releasing creativity to be explored. With the stable double Z-axis, the Kobra Max offers a more stable operation and even print.


“The Anycubic Photon M3 series will include three versions: Anycubic Photon M3, Anycubic Photon M3 Plus, and Anycubic Photon M3 Max. We have redefined the UV light of these resin 3D printers with the Anycubic LighTurbo matrix light source. With bright LED lights and a high light transmittance screen, the Photon M3 series can give a higher uniformity of light and strong light energy, thus producing great print details and faster print speed. In addition, the M3 series will continue to be equipped with laser engraved print platforms and replaceable anti-scratch film to contribute to higher print success rates and a longer screen service life,” added James Ouyang.

Anycubic Photon M3 3D printer offers a surprising amount of bang for customers’ buck
As an entry-level resin 3D printer for beginners, the Anycubic Photon M3 comes with a build volume of 18.0 x 16.4 x 10.2 cm (HWD). It is equipped with a 7.6-inch 4K+ monochrome LCD screen and 400:1 contrast ratio. The Photon M3 printer can print models with more precise edges and corners.

Anycubic Photon M3 Plus helps with the exploration of fun by remotely controlling and monitoring the 3D printing process
Apart from featuring an Anycubic LighTurbo matrix light source and 9.25” 6K exposure screen, the Anycubic Photon M3 Plus is also equipped with an Anycubic Auto Resin Filler. It can provide a resin backup whenever needed for the duration of printing, thus allaying concerns about running out of resin mid-print. Anycubic Photon M3 Plus is also the first machine that can support Anycubic Cloud. By connecting with Anycubic Cloud, the printing process of the Photon M3 plus 3D printer can be remotely controlled and monitored. 

Anycubic Photon M3 Max helps with realizing creativity with its large build volume and outstanding printing details
Anycubic Photon M3 Max is the most anticipated model in this product launch for its 13.6″ 7K monochrome screen and 6,480 x 3,600 pixel resolution. The large print volume of 30.0 x 29.8 x 16.4 cm (HWD) offers ample space for creativity. Anycubic Photon M3 Max is also equipped with the Anycubic Auto Resin Filler to prevent running out of resin in mid-print.

Anycubic also introduced the Water-Wash Resin+ series to reduce users’ costs in cleaning the prints. The resins are less odorous and can be washed in water without requiring isopropyl alcohol (IPA). This makes post-processing easier and reduces harm to the environment. In addition, the company has released Anycubic AirPure to reduce the odor produced from resin 3D printers and provides users with efficient purification and lasting freshness. Anycubic also announced its first-ever concept 3D printer, Anycubic Photon Nex. It marks the company’s breakthrough exploration in speed, smart printing, and science-fiction-inspired design and establishes the foundation for Anycubic’s future 3D printers with new functions and designs.

Pricing and availability:

Anycubic Photon M3 Max will begin pre-sales on March 28 from the official Anycubic store. The other four 3D printers will be available on the same day also from the official Anycubic store, Anycubic AliExpress store, Anycubic eBay store, and Anycubic Amazon store. Price details are as follows:

  • Anycubic Kobra starts from US$299
  • Anycubic Kobra Max starts from US$539
  • Anycubic Photon M3 starts from US$299
  • Anycubic Photon M3 Plus starts from US$699
  • Anycubic Photon M3 Max pre-sale for US$1,099

About Anycubic

Anycubic is a leading company in the 3D printing industry specializing in 3D printer R&D, manufacturing and sales, providing many affordable, high-performance, and smart printers for different customers, consumers, hobbyists, schools, and product designers. Since its establishment in 2015, we have been committed to propelling 3D printing technology to enable people from all walks of life to unleash their imagination and turn creativity into reality.

Cision View original content to download multimedia:https://www.prnewswire.com/news-releases/anycubic-unveils-kobra-series-and-anycubic-photon-m3-series-of-3d-printers-301510797.html

Huntkey Will Continue Its Low-Carbon Strategy into the Next Decade

SHENZHEN, China, March 26, 2022 China aims to peak carbon dioxide emissions by 2030 and achieve carbon neutrality by 2060. As a Chinese enterprise with 27 years of experience in the power supply industry, Huntkey has insisted on developing low-carbon manufacturing and products for more than 10 years. Huntkey not only makes its efforts to protect the environment during the Earth Hour period, but low carbon will also be the long-term goal of Huntkey in the next few decades.

“From 2008 to the present, Huntkey initiated and participated in the formulation and promulgation of 28 categories of Chinese and industry-level standards,” said Maoqi Liu, CEO, Huntkey Group. “The formulation and implementation of these standards not only provide a strong guarantee for the quality of our products, but also contribute to the globalization of Chinese products.”

From the aspect of standard formulation, when Huntkey participates in the drafting and formulation of each standard, it will take the opportunity to put forward low-carbon concepts and corresponding indicators for the reference of the certification centers and technical committees. At the same time, Huntkey actively advocates low-carbon environmental protection elements in its products, in order to enable users at all levels to use reliable, energy-saving and environmentally friendly products, creating more value for users and society.

On the product side, the distinctive energy saving and environmental protection of Huntkey products will be reflected from the aspects of design, manufacturing, selection of environmentally friendly materials, scrap disposal, and safe recycling, and the packaging of each product will emphasize “a dual-carbon economy” and “low-carbon technology”, aiming for fully demonstrating Huntkey’s environmental protection scientific and technological achievements, so that every user can realize their contribution to the environment in the process of using energy-saving products.

For internal employees and external users, Huntkey actively promotes a low-carbon culture. It has promoted low-carbon knowledge on the company’s internal website every week through the corporate culture department. The human resources department also announced an incentive mechanism to reward employees who practice a low carbon lifestyle. Huntkey distributes low-carbon news and knowledge on the media, plans activities and interacts with end-users, and encourages users to participate in low-carbon activities together. For example, Huntkey initiated Earth Hour interactions on Weibo and WeChat. People can leave a message to share what they did during the 1 hour when the lights were turned off. Huntkey will filter out some interesting answers and give participants Huntkey’s fast chargers and surge protectors. Users have the opportunity to experience products that charge faster and consume less power. The power strip with fast charging function and anti-surge protection not only saves the user’s time but also ensures the safety.

In summary, whether it is the “develop low-carbon technology and live an environmentally friendly life” initiated 11 years ago or the “Double-Carbon Practice Declaration” (double-carbon refers to carbon peak and carbon neutrality) advocated now, Huntkey has only one purpose, that is, through its own products, words and deeds, to inspire the goodwill of consumers and help the society contribute to social and environmental progress and sustainable development, and become a respected enterprise.

About Huntkey

Founded in 1995, Huntkey is a leading provider of PC power supplies, power strips, surge protectors, laptop adapters, phone chargers, monitors and air purifiers. Huntkey is a member of Power Sources Manufacturers Association (PSMA) and China Power Supply Society (CPSS). Covering approximately 1,000,000 square meters added up from three industrial parks, Huntkey is one of the most famous brands and largest companies in mainland China. It is headquartered in Shenzhen. By 2022, Huntkey has been practicing low-carbon economy for more than ten years. Practicing a low-carbon lifestyle with Huntkey.

Website: http://www.huntkey.com

Facebook: https://www.facebook.com/HuntkeyGlobal

Instagram: https://www.instagram.com/huntkey_global

Contact

Media Contact: Ms. Lava Huang, E-mail: marketing@huntkey.com

Business Contact: Ms. Ferris Liao, E-mail: huntkey@huntkey.com 

Cision View original content:https://www.prnewswire.com/news-releases/huntkey-will-continue-its-low-carbon-strategy-into-the-next-decade-301511215.html