[COMPUTEX 2021] AMD Releases the New Zen 3 Ryzen 5000G series APUs and RDNA 2 Radeon RX 6000M Series Mobile GPUs

Taiwan’s biggest tech exhibition is back for 2021 season, and it is a unique one. Last year COMPUTEX 2020 had to be cancelled because, if you remember correctly, the pandemic situation that is COVID-19 broke out earlier in 2020 and disrupted the entire world. This year, COMPUTEX 2021 is back but without physical presence. It is now fully online.

AMD has been a keen participant of COMPUTEX and they are not going to miss the 2021 season of COMPUTEX. They took the center stage of COMPUTEX this morning, well via YouTube, to launch their latest APUs and Mobile GPUs. They introduced the AMD Ryzen 5600G and AMD Ryzen 5700G APUs and AMD Radeon RX 6600M, AMD Radeon RX 6700M, and AMD Radeon RX 6800M mobile GPUs.

AMD Ryzen 5000G Series

Since the Zen 3 architecture with the AMD Ryzen 5000 series was introduced last year, one of the biggest requests from gamers and enthusiasts was a Zen 3 architecture APU (Accelerated Processing Unit). AMD has answered with the AMD Ryzen 5600G and AMD Ryzen 5700G. Now, you have a choice of building a modern system without a dedicated GPU.

First, the AMD Ryzen 5 5600G. The 5600G is sort of the budget option for builders and gamers. It still features 6 CPU cores like the regular 5600X. Additionally the 5600G packs 7 Radeon VEGA GPU cores within the same die.

Of course, there are some trade-offs to be made with the integrated GPU cores. Boost clock goes up to 4.4 GHz only rather than 4.6GHz. The APU also only has 16MB in L3 cache compared to 32MB.

If you need a little bit more power for the long run, you want the AMD Ryzen 7 5700G. It is sort of comparable to the other Ryzen 7 that is built for desktops, the AMD Ryzen 7 5800X. Both has 8 Zen 3 architecture cores to boot. The 5700G though has 8 more cores than the 5800X in the form of Radeon VEGA graphics cores.

Again, with graphics cores integrated onto the processing die, there are some trade-offs to be made. The maximum boost clock on the 5700G is down to 4.6GHz, from 4.6GHz. The L3 cache is also halved at 16MB compared to 32MB. The benefit of having integrated GPU though would be a blessing to budget constrained builders.

AMD Radeon RX 6000M Series

At COMPUTEX 2021, AMD also introduces their new mobile based GPUs as well – the AMD Radeon RX 6600M, AMD Radeon RX 6700M, and AMD Radeon RX 6800M. If you are wondering what the equivalent competitor’s mobile GPUs are, those would be the NVIDIA GeForce RTX 3060, GeForce RTX 3070, and GeForce RTX 3080. Alongside the AMD Radeon RX 6000M series too, they introduced a sort of guideline of AMD’s version of the ultimate gaming laptop they call the “AMD Advantage”.

The AMD Radeon RX 6600M is the entry-level choice from the AMD Radeon for mobile GPU line-up. You get 28 compute units and 8GB of GDDR6 RAM with clock speeds at 2.1GHz. Going up from there is the Radeon RX 6700M with 36 compute units clocked at 2.3GHz and 10GB of GDDDR6 RAM. The top-of the line Radeon RX 6800M packs 40 compute units clocked at 2.3GHz with 12GB of RAM.

All of the Radeon RX 6000M mobile GPUs comes with RDNA 2 technology, of course. They also brought AMD’s Smart Access Memory, or resizable bar in more common terms to the mobile computing market with the introduction of the Radeon RX 6000M series. They also introduced the AMD Radeon Chill technology with the mobile GPUs alongside AMD FidelityFX for all AMD based system, even if they are running a non-AMD GPU platform.

AMD Radeon Chill

AMD Radeon Chill is a clever technology that is supposed to minimise a problem that has been plaguing gaming laptops forever. AMD says that it is a power-regulation technology that is supposed to extend the battery life of a gaming laptop without sacrificing too much performance. At the same time AMD’s SmartShift technology also regulates power power consumption and processing power between the CPU and GPU to always optimise gaming and productivity performance.

AMD FidelityFX

At the same time, there is AMD FidelityFX technology that upscales your games from a lower resolution to a higher one. If it sounds familiar to another competitor technology, it is because they are basically the same things. But there is some good in upscaling contents, despite not getting all the high-definition detail. You get more performance out of your system at least. The best news is that it is coming to all AMD based systems. It even works on older non-AMD GPUs if you want it to.

AMD Advantage Design

AMD also introduced the AMD Advantage framework for gaming laptops fully based on the AMD processors. They introduced ASUS’ ROG Strix G15/G17 and HP Omen 15 alongside the announcement too.

AMD Advantage outlines the guidelines of what an AMD gaming laptop should work like. For example, the minimum requirement for an AMD Advantage certified laptop is featuring a display with at least 144Hz in refresh rate. Display has to be either an IPS or OLED display that can push above 300nits in brightness. They also are required to last more than 10 hours when you watch movies as well. To ensure smooth and fast operation, and AMD Advantage laptop has to have at least one NVMe PCIe Gen3 M.2 SSD. Of course, they have to pack an AMD Ryzen processor with an AMD Radeon RX GPU.

The first AMD Advantage Gaming laptops are expected to come as early as June 2021. For more information on AMD’s new APUs and mobile GPUs, you can head over to AMD’s website.

PureSoftware and NICE Systems Join Hands to Empower Enterprises to be Future-Ready with its Next-Gen Automation and Customer Experience Solutions


SINGAPORE, June 1, 2021PureSoftware, a next-gen software product, and services company, has partnered with NICE Systems, a worldwide leading provider of cloud and on-premises enterprise software solutions. The partnership aims at using PureSoftware’s end-to-end implementation services to enhance the user experience for enterprises across the globe with NICE’s world-class platforms –InContact CXone and Actimize. 

PureSoftware aims to strengthen its Unified Communications CoE by building a dedicated team with capabilities on the NICE platform. With PureSoftware’s focused presence in Asia; this partnership will enable PureSoftware’s customers in the region to get more support as they transform their contact centres and communication processes to meet the needs of the emerging remote working environments.

"We are delighted with our new partnership with PureSoftware and are excited to be delivering a joint go to market in ASEAN to bring new levels of experience to our customers," said Andrew Hindmarch, VP of Channel & Alliances for APAC at NICE Systems.

The RPA Center of Excellence at PureSoftware that has been delivering process automation solutions for customers will also now include NICE Advanced Process Automation (APA), with expertise in implementing the employee virtual assistant, NEVA. 

"We’re excited to partner with NICE to expand our presence in the unified communications. This powerful association as an implementation partner will expand our capabilities in helping organizations drive a more flexible and streamlined contact center experience for the modern global enterprise," said Manish Sharma, Chief Executive Officer, PureSoftware.

Together, PureSoftware’s implementation capabilities and NICE solutions will power enterprises to know their customers better, act in real-time, and ensure that every employee is engaged. 

About PureSoftware:
PureSoftware is a software product and services company that focuses on driving a differentiated customer experience, accelerating cycle time, and improving business outcomes through the integration of digital solutions, robotic automation, and non-linear commercial models. It’s global delivery organization offers reliable technology led solutions that meet performance, quality, time to market, rapid customization, and support.

About NICE
NICE Systems is the worldwide leader of intent-based solutions that capture and analyze interactions and transactions, realize intent, and extract and leverage insights to deliver impact in real-time. Driven by cross-channel and multi-sensor analytics, NICE solutions enable organizations to improve business performance, increase operational efficiency, prevent financial crime, ensure compliance, and enhance safety and security.

Media Contact:
Gyaneshwari Tiwari
gyaneshwari.tiwari@puresoftware.com  
+91-8376932369

Unveiling JK5 Data Center Building, DCI Indonesia Sets a Higher Bar for Data Center Industry in Indonesia

Through its newly launched JK5 building, DCI has imported the global standard of operational excellence for the data center ecosystem into Indonesia.

CIBITUNG, Indonesia, May 31, 2021PT DCI Indonesia Tbk (DCI) (IDX:DCII) has officially launched its fourth data center building, JK5, in Cibitung, West Java, with a total power capacity of 15MW. With the new building,  DCI’s power capacity now sits at an astounding 37 MW, making it the leader in Indonesia’s data center colocation market, according to a 2020 report by Structure Research.

Aligning with "Making Indonesia 4.0" , JK5 has been built to support the long-term growth of Indonesia’s digital economy with its market value expected to reach USD 130 billion by 2025. Thus, local data center providers with the best quality and operational excellence must be able to cater to this surging demand as data centers play a crucial role as the backbone in providing infrastructure for Indonesia’s growing digital economy.

As a result, DCI plans to build up to 15 data center buildings with a total capacity of 300MW, equipped with internationally certified infrastructure to set a new standard for Indonesia’s data center industry.

Advanced Facilities for a Data-Based Future

Since DCI’s establishment, the brand’s uptime performance has been a testament of its commitment in supplying the best services to customers. DCI has achieved 100% uptime performance for Service Level Agreement (SLA) Operations.

"We managed to achieve this through the implementation of operational and service excellence which is always one step ahead through the utilization of Artificial Intelligence (AI) and Internet of Things (IoT) which avoids incidents that may potentially disrupt IT operations," said Toto Sugiri, CEO of DCI.

Committed to support Indonesia’s digital economy

DCI is trusted by international and local companies including three global cloud service providers, 7 e-commerce platforms, including the largest e-commerce platform in Indonesia and Southeast Asia, more than 30 telecommunications service providers, 124 customers from the financial industry (comprising leading banks from the United States, Southeast Asia and Indonesia), and more than 100 customers from other various industries.

Moving forward, DCI is committed to support Indonesia’s digital economy infrastructure and will continue to focus on operational excellence, while maintaining international standards to become the best and most reliable data center in South East Asia.

For more information, visit https://dci-indonesia.com/
For photo documentation, visit http://bit.ly/DCIJK5 

About DCI Indonesia:

Established in 2011, DCI Indonesia (DCI) is the leading data center provider in Indonesia and the first Tier-IV data center in Southeast Asia. We provide reliable, interconnected, and well-managed cloud and carrier-neutral data center infrastructure services for various local and international customers. Our state-of-the-art campus is located in Cibitung, Bekasi. It is home to four purposely-built data centers with a current capacity of 37MW and a planned total capacity of 300MW.

PT DCI Indonesia Tbk (DCI) was established as a business enabler by providing reliable and sustainable data center infrastructure services in Indonesia with 100% uptime performance for Service Level Agreement (SLA) Operations. Our cutting edge facility is supported by a robust ecosystem of different industries and platforms, enabling customers to interconnect with each other seamlessly. Located in the prime industry area of MM2100, DCI data center is only 40 kilometers away from Jakarta’s central business district. With global operating standards and procedures, on top of state-of-the-art data center equipment, DCI is able to provide maximum availability to customers to access their most mission-critical assets, ranging from financial institutions, more than 30 network service providers, e-commerce, cloud service providers and enterprises. DCI Indonesia has zero history of downtime since the beginning of serving the market. This exceptional performance comes from mentorship from leaders who have more than 25 years of experience in the IT and data center industry. As a growing and ever-improving company, we are also adding more buildings inside our total land of 8.5ha, with a total power capacity up to 300 MW.

Related Links :

https://dci-indonesia.com/

PolyU develops biomimetic nanosheet for cancer therapy and imaging

HONG KONG, May 31, 2021 — A research team from the Department of Applied Biology and Chemical Technology (ABCT) of The Hong Kong Polytechnic University (PolyU) has developed a novel type of biomimetic nanosheet with a multi-modal imaging function, which can track tumour development and treatment processes in real-time. By harnessing two emerging cancer therapies, namely immunotherapy and photothermal therapy, the biomimetic nanosheet enables effective and precise treatment of tumours, which will significantly improve the therapeutic outcome of tumours, reduce side effects and increase patients’ survival rates. The research findings have been published in the prestigious international journal Advanced Science.

Professor Wing-tak WONG, Chair Professor of Chemical Technology of the ABCT of PolyU (also the Deputy President and Provost of PolyU), and his team started the research in 2018. Professor Wong said, "The biology and chemical experts of PolyU have been dedicated to new drug development over the years, and have achieved some significant breakthroughs especially in cancer treatment. The newly developed biomimetic nanomaterials developed by PolyU are part of our endeavours in fighting against cancer. By integrating two emerging cancer therapies, immunotherapy and photothermal therapy, with three imaging modalities for the first time, the novel biomimetic nanomaterials provide a practical design blueprint for the development of a new generation of cancer theranostics agents which have high targeting ability, efficacy and safety."

Synergistic therapy- Combining immunotherapy and photothermal therapy

New cancer treatments emerge since conventional cancer treatments like surgical therapy, chemotherapy and radiotherapy have different limitations and side effects. Dr Summy Lo Wai-sum from ABCT said, "Immunotherapy and photothermal therapy are emerging methods which are expected to provide more options for cancer treatment. The biomimetic nanosheets developed by our team allow us to combine these two methods for synergistic therapy. By applying the synergistic therapy in an experiment for colorectal tumour treatment, we found that it is more effective than single therapy and has fewer side effects on the human body."

The research team used 2D nanosheets (FePSe3) to develop a novel multifunctional nanomaterial for cancer theranostics. PD-1 (programmed cell death 1) exists on T cells, whereas PD-L1 (programmed cell death ligand-1) exists on tumour cells. Cancer cells inhibit the activation of the immune system and prevent T cells from attacking cancer cells through conjugating its PD-L1 with PD-1 on T cells. The team therefore loaded the FePSe3 nanosheets with anti-PD-1 peptide (APP), which can block the conjugation between PD-1 on T-cells and PD-L1 on cancer cells to achieve efficient immunotherapy. Without directly attacking the cancer cells, blockage of the interaction between the PD-1 and PD-L1 has been reported to revoke T cell functions, leading to enhanced antitumour immunity.

After coating with cancer cell membranes, the nanosheets will become a biomimetic nanomaterial with tumour cell membrane characteristics that provide effective camouflage, enabling them to target the tumour site efficiently. Once the biomimetic nanosheets are injected into the living bodies, the cell membrane enveloping the nanosheets will preferentially adhere to cancer cells and slowly peel away, revealing the nanomaterial to begin immunotherapy. 

Dr Lo explained, "The innate immune system attacks foreign objects which makes it difficult for the drug-loaded nanomaterials to reach the tumour site. The cancer cell membrane has a tumour-targeting characteristic that will converge homologous cells. It explains why the biomimetic nanosheets become attracted to the cancer cells when they are in close proximity with the cancer cells during blood circulation. In addition, the large specific surface area of the 2D nanomaterials is conducive to improving the drug loading ratio of the anti-PD-1 peptide, which will help with enhancing the therapeutic efficiency, as well as reducing the drug dosage and hence alleviating side effects."

On the other hand, the nanomaterials (FePSe3) chosen possess good photothermal conversion efficiency, and so they can convert near infrared laser irradiation into heat to kill tumour cells directly, thus achieving effective photothermal therapy. The heat can further promote immunotherapy by effectively inhibiting tumour growth, which results in a synergistic effect of immunotherapy and photothermal therapy.

Three imaging modes to help real-time monitoring of cancer treatment

The PolyU-developed biomimetic nanosheets can also achieve the goals of theranostics. By harnessing magnetic, optical and thermal properties, the FePSe3 nanomaterials enable three imaging modalities, namely magnetic resonance imaging (MRI), photoacoustic imaging (PAI) and photothermal imaging (PTI), for real-time tracing and tracking of the tumour sites and the nanosheets, in order to achieve multimodal diagnosis in cancer treatment.

PolyU’s novel nanomaterial can facilitate theranostics by combining diagnosis, therapy and efficacy monitoring. It not only enables the imaging and treatment of tumours, but also the real-time monitoring of treatment outcomes. The PolyU team carried out experiments on mice bearing subcutaneous colorectal tumours to investigate the application in living animals.

The study showed that the tumour volume had significantly reduced after 25 days of synergistic therapy, whereas the survival rate of the mice was three times higher than that of the control groups. The major organs of the mice, including the heart, liver, spleen, lung and kidney, showed no obvious inflammation and damage, demonstrating high biosafety and low toxicity. The research team also utilised the MRI and photoacoustic imaging capabilities of the biomimetic nanosheet to observe the tumour for 24 hours, visualising the targeting and accumulation of the nano-theranostic material at the tumour site. Through photothermal imaging, it was observed that the nanomaterial can produce localised heat under near infrared laser irradiation within a few minutes. The experiment proved that PolyU-developed biomimetic nanosheets, with multi-modal imaging capability, can offer accurate and comprehensive detection and evaluation of tumour development, ultimately achieving theranostics alongside synergistic therapeutic effects. 

Dr Lo said, "In view of the fact that there is a lack of efficient and safe theranostics materials, PolyU’s biomimetic nanomaterial has promising prospects in application. In future, our team will further expand the application of this nanomaterial to other cancer therapies and study the metabolism of the nanosheet in the living body, hoping that more cancer patients can benefit from new theranostic methods."

Related Links :

http://www.polyu.edu.hk/htm/

Xiaomi Introduces 200W “HyperCharge” to Charge Your Smartphones in 8 minutes.

Xiaomi just had their own tech demo on Twitter, and it is amazing. It was more like Xiaomi showing off their latest charging technology. In the video, Xiaomi charged a Mi 11 Pro with 4,0000mAh battery in 8 minutes. They also announced that they also have a new more powerful wireless charging technology that can charge the Mi 11 Pro in 15 minutes with 120W.

To be fair, fast charging technology has received plenty of attention in recent years. Modern flagships have to charge faster every year. The charging speed race technically was kicked off by most of the Chinese manufacturers like OPPO and Xiaomi. OPPO, of course relies on their own VOOC charge technology. Their commercially fastest charging products charge at 125W at the maximum.

In some sense, the charging speed race has been an exciting one to say the least. The wonders of fast charging technology have given us users the freedom of leaving your device on the charger for two hours or less and get going for the rest of the day. It has also freed us from sitting near a wall socket for long hours at a time. With Xiaomi’s demo, you probably can expect to charge a similar smartphone within a minute in a few years’ time.

Here is the thing though, that much displacement of electricity at one go is going to generate a lot of heat. While the speed at which the battery is being charged will cause more wear to the battery itself, the heat produced could also cause extra wear on the battery. More heat will also lead to less stability and in some cases, fire or explosion. In that case, there could be safety and durability problems that manufacturers will soon have to work with before they can push battery charging speeds to 200W and above.

Xiaomi’s tech demo is not an indication of when they will equip devices with 200W charging capabilities. 120W wireless charging mentioned does not also have an implementation date at this time. By the looks of it though, the charger technology is ready for prime time. That also means that we can expect Xiaomi to launch charger products that will charge faster than 120W and fast wireless charging at more than 80W.

Announcement of change in the total number of votes in AB SKF

GOTHENBURG, Sweden, May 31, 2021 — Due to a conversion of shares from Series A to Series B in accordance with AB SKF’s Articles of Association, the Company confirms the following.

As per 31 May, the Company’s share capital amounts to SEK 1,138,377,670 and the total number of shares amounts to 30,819,375 shares of Series A and 424,531,693 shares of Series B. The number of votes in the Company amounts to 73,272,544.3.

AB SKF does not hold any own shares.

Aktiebolaget SKF (publ)

This is information that AB SKF is obliged to make public pursuant to the Financial Instruments Trading Act. The information was submitted for publication at 8:00 CET on 31 May 2021.

For further information, please contact:

PRESS: Theo Kjellberg, Director, Press Relations
tel: 46 31 337 6576, mobile: 46 725-776576, e-mail: theo.kjellberg@skf.com

INVESTOR RELATIONS: Patrik Stenberg, Head of Investor Relations
Patrik Stenberg, 46 31-337 2104; 46 705-472 104; patrik.stenberg@skf.com

This information was brought to you by Cision http://news.cision.com

https://news.cision.com/skf/r/announcement-of-change-in-the-total-number-of-votes-in-ab-skf,c3357068

The following files are available for download:

https://mb.cision.com/Main/637/3357068/1424993.pdf

20210531 Announcement of change in the total number of votes in AB SKF

 

OPAS: A Game-Changer in Post Covid-19 Landscape

PORTLAND, Ore., May 31, 2021 — We believe that it’s safe to say that Covid-19 will likely be one of the defining events of 2021, and it will further have implications that will keep surfacing for years to come.

The situation is drastically changing, and the amount of people that are deemed safe to gather in a place has reduced from thousands to hundreds to ten. Movie theaters, bars, restaurants, and gyms in most major cities are shutting down. And that’s not all; many office workers are facing new challenges that involve working from home.

Post Covid-19 and the changing trends of online shopping

People are coming to terms with the realities of the post-Covid-19 world, and they understand how difficult it will be for things to go back to normal. To say that we’re living in an unprecedented time feels like an understatement.

One of the main responses we’ve seen to how people are approaching this period of uncertainty and isolation is in severe overnight changes to their shopping behaviors, and that’s not all; the latest travel restrictions have also stopped person-to-person exchanges. From bulk buying to online shopping, people are changing what they’re buying how and when.

Amid this uncertainty, OPAS has emerged as a one-stop shop for all your shopping needs, no matter where you’re living in the world.

What can OPAS do for you?

The post-Covid-19 landscape doesn’t leave much room for international shipping. The main reason for this is the new healthcare regulations. Stores that are operating on a smaller scale don’t have the personnel or experience needed to handle post-Covid-19 international shipping.

OPAS will make sure that you get what you want, no matter where you live. Shopping from the US amid the pandemic has never been easier, thanks to OPAS. OPAS will provide you your own US address so your purchases can get shipped there. Once you have everything you want in your virtual mailbox, you can easily log into your account and request to have your items shipped to your original address in your native country.

No Sales Tax? YES – OPAS can do that for you

Almost every package forwarding company will charge you Sales Tax. Therefore, on every purchase, you will be charged sales tax. OPAS can get you your favorite products without having to pay any sales tax. How is that possible? OPAS is located in the state of Oregon, which has NO SALES TAX. So any product that you’ve shipped to your OPAS address will have no sales tax. This will allow you to save almost 7% to 10% on your purchases compared to other package forwarding companies.

OPAS has emerged as a game-changer for industries and individuals who aren’t willing to compromise on the things they want. OPAS will hand pack each of your products, making sure that they will stay in perfect shape when it reaches your doorstep.

Disney+ Hotstar Shows Off Malaysian Content Ahead of June 1st Launch

Disney+ is coming to Malaysia on June 1, 2021 – that’s TOMORROW – as Disney+ Hotstar. The streaming service has been making waves with the huge subscription uptake in countries that it has already been launched in. The number currently stands at just over 100 million across 59 countries as of March 2021. It’s bound to see an increase with the Malaysian launch just a day away.

The service will bring Disney’s complete catalogue of shows including all of its original animations such as Snow White, Sleeping Beauty, Mulan, Aladdin, Dumbo and more; their live-action remakes including the recently screened Mulan starring Liu Yifei and Jet Li; as well as other Disney favourites including Pirates of the Caribbean. In addition to that, subscribers will be gaining access to the plethora of content available from Marvel Studios including all of the movies in Phase 1, 2 and 3 of the Marvel Cinematic Universe (MCU), the Star Wars Saga, National Geographic content and Pixar’s library of content.

However, that wasn’t the focus of their recent announcement. Disney+ Hotstar is adamant in showcasing that it isn’t just a platform for international content. In fact, the streaming service will be launching with a pretty packed line up of original content from local studios like PrimeWork Stidios. WAU Animation, Act 2 Pictures, Les’ Copaque Productions, and Red Films. It seems like the House of Mouse was busy stocking its library with new and old Malaysian content while preparing for the big day.

J2: J Retribusi | Disney+ Hotstar Malaysia

Of note, Disney+ Hotstar will be bringing three Malaysian blockbusters straight to the silver screen via its service. J2: J Retribusi which stars Amelia Henderson, Zul Ariffin and Ashraf Sinclair; Zombitopia starring Shaheizy Sam, Bront Palarae and Sharifah Aman; and Ada Hantu starring Hairul Azreen will be making their Malaysian debuts on Disney+ Hotstar and skipping the theatres.

Ada Hantu | Disney+ Hotstar Malaysia

It’s not just movies making their big debut on the service either, Malaysian series will be premiering on Disney+ Hotstar. Drama series Semanis Senyumanmu starring Aiman Hakim Ridza and Daiyan Trisha and Wifi Sebelah Rumah starring Zul Ariffin and Ruhainies will be premiering exclusively on the platform. That said, the series Single Terlalu Lama starring Ungku Ismail Aziz and Julia Farhana Marin and Kekasih Hati Mr. Bodyguard starring Redza Rosli and Sharifah Rose will be premiering first on the platform up to 15 hours before their live telecast.

Zombitopia | Disney+ Hotstar Malaysia

Of course, that’s just the tip of the iceberg when it comes to content from Disney+ Hotstar. The streaming service will be debuting a slew of original content. One of the more anticipated releases is the upcoming Marvel series Loki which follows Marvel’s God of Mischief as he faces the threat of being erased by the Time Variance Authority after stealing the Tesseract during the events of Avengers: Endgame. Tom Hiddleston will be reprising his role as Loki. The upcoming series joins a stable of growing series taking place in the MCU. In addition, subscribers will be able to catch up with WandaVision and The Falcon and the Winter Soldier which have already debuted.

Disney+ Hotstar will be launching on June 1, 2021 in Malaysia. It will be available for MYR54.90 for three months. The service will be available to Astro Movies Pack subscribers for an additional MYR5.00 a month. Subscribers will be able to stream on two concurrent devices.

Circle Completes $440 Million Financing to Drive Growth and Market Expansion


BOSTON, May 29, 2021 — Circle, a global financial technology firm that provides payments and treasury infrastructure for internet businesses, today announced it has raised $440 million in financing from leading institutional and strategic investors.

The financing, among the top 10 in private fintech investments, fuels the company’s continued growth, organizational development and market expansion opportunities. On the heels of recruiting world-class leaders to Circle’s executive team, including Dante Disparte, as Chief Strategy Officer and Head of Global Policy, Jeremy Fox-Geen, as Chief Financial Officer, Mandeep Walia as Chief Compliance and Risk Officer, along with hundreds of open roles across the U.S. and around the world, Circle is now poised to meet significant global demand for its products and services aimed at marrying the existing financial system with breakthroughs in digital currency within payments and finance.

Underpinning this growth is Circle’s principal contribution in the rapid rise of USD Coin, or USDC, as the world’s most trusted and fastest growing dollar digital currency, which now stands at $22 billion in circulation. USDC has grown by 436% in 2021 alone, and over 28,000% over the past 12 months.

"As a company, Circle has remained committed to our mission of raising global economic prosperity through the power of digital currency, blockchains and breakthroughs in programmable money. The sustained global demand for our services powering the growth of USDC, as the most trusted and well regulated dollar digital currency, signals that we are one step closer to achieving our mission. With powerful backers who are committed to our mission and vision, we will redouble our efforts to expand into new markets, continue driving fundamental technology innovation and grow our team," said Jeremy Allaire, Circle co-founder and CEO.

The financing included investments from leading private equity, institutional and strategic investors, including Fidelity Management and Research Company, Marshall Wace, Willett Advisors, Intersection Fintech Ventures, Atlas Merchant Capital, Digital Currency Group, FTX, Breyer Capital, Valor Capital Group, Pillar VC, as well as Michael J. Price and Friends. 

"Circle has been a pioneer in unlocking the potential of blockchain-enabled payments. With USDC’s extraordinary growth, Circle has established itself at the center of a new generation of financial services and applications. We are proud to continue to partner with Circle to develop a better global financial system," said Barry Silbert, Founder and CEO of Digital Currency Group.

"Circle has been an experienced player in making fiat work on blockchains for nearly eight years and has built deep capabilities to ease payments in crypto. At FTX we’re excited to partner further with Circle to help expand these capabilities to all crypto users," said Sam Bankman-Fried, CEO of FTX.

About Circle
Circle is a global financial technology firm that enables businesses of all sizes to harness the power of stablecoins and public blockchains for payments, commerce and financial applications worldwide. Circle’s platform has supported more than 100 million transactions by more than 10 million retail customers and more than 1,000 businesses. Circle is also a principal developer of USD Coin (USDC), which together with Coinbase and the Centre Consortium oversees the standards and protocol for what has become the fastest growing, regulated, fully reserved dollar digital currency. USDC now stands at more than 22 billion and has supported over $615 billion in transactions over the past year. Today, Circle’s transactional services, business accounts, and platform APIs are giving rise to a new generation of financial services and commerce applications that hold the promise of raising global economic prosperity for all through programmable internet commerce. Learn more at https://circle.com

Logo – https://techent.tv/wp-content/uploads/2021/05/circle-completes-440-million-financing-to-drive-growth-and-market-expansion.jpg

Related Links :

http://www.circle.com

https://circle.com

Snapmaker Showcases Comprehensive 3D Printing Innovations at TCT Asia 2021

The Newly Released Game-changing Rotary Module Makes Its Debut

SHENZHEN, China, May 28, 2021 — Snapmaker brings its comprehensive 3D printing solutions together with brilliant applications on display at TCT Asia, which runs from May 26-28 in the National Convention & Exhibition Center, Shanghai, China, and its newly released Snapmaker 2.0 Rotary Module becomes the spotlight.


3D printing, as a form of additive manufacturing, is the focus of TCT Asia. Unlike most exhibitors, Snapmaker combines additive manufacturing and subtractive manufacturing and creates a 3-in-1 modular machine that incorporates 3D printing, laser engraving and cutting, and CNC carving.

At TCT Asia this year, the Rotary Module was first unveiled in China since it was launched abroad at the end of 2020. Served mid-advanced DIY makers, 3D model designers, and technical engineers, the Rotary Module is a handy attachment compatible with Snapmaker 2.0 A250 and A350 that makes desktop 4 axis CNC possible. As far as we know, there are no other similar products in the market.

Regarding the performance, it is equipped with a strain wave gearing and packs a 100:1 speed reducer, supports 360° 5-degree continuous rotation, and a 0.2° precise control. With the help of the Rotary Module and the custom Snapmaker software, users can create artworks in fine detail in the 4th dimension with various materials including wood, tooling boards, non-transparent acrylics, and more.

To demonstrate its capabilities, Snapmaker created remarkable applications, among which the On Mars Sand Table wows the attendees most with its delicate craftsmanship. Hundreds of visitors express their interest and eagerness to explore more.


"I’m glad to notice that more users are getting to know 3D printing this year. The applications of 3D printing can actually help individuals and enterprises to solve real problems," says Ke Shuqiang, CFO & COO at Snapmaker. "As a 3D printer manufacturer, Snapmaker will establish strong relationships with users, service provider, and distributors to promote the consumerization of 3D printing."

About TCT Asia

Organized by VNU Rapid News Ltd, TCT Asia is one of the world’s leading design-to-manufacturing events focused on additive manufacturing, 3D printing, design, and engineering technology.

About Snapmaker

Founded in 2016, Snapmaker is a digital manufacturing tool company dedicated to providing cost-effective multitool 3D printers and relevant add-ons for individuals and enterprises worldwide.

www.snapmaker.com
Contact info: press@snapmaker.com

Related Links :

http://snapmaker.tmall.com